- HOME - CONTACT US - KOREA
   
Home> Products> mugu Oxegen Generator > CoP-2030  
  M3000series
  M2010
  M2020
  G210P
  Out-door Generators
  COP-2030
  CAP-M1005
  CAP-M0510
  CP-1000
  SWOP-2000S
  CWP-G300S/CWP-G300H
  CWB-B series
  CVU-U2012
 
 
 
 
 
SPECIFIATION & FUNCTION
 
Oxygen generator for vehicles(COP-2030)
Weight 3.2kg
Rated Voltage DC 12V
Current consumption 3.5A
Oxygen generating system RVSA system
Discharge 2LPM
Density of Oxygen 28~32%
Operation time Automatically stops after 30min operating
Display window LED display (automatic mode)
 
Great for you and your loved ones.
Everyone should have an oxygen generator in their car.

High density oxygen improves brain functions.
Fill your lungs with pure & fresh oxygen!

 
Benefits of an Oxygen Generator in Vehicles

80% of the brain's nutrition is from oxygen. The consumption of the brain's oxygen consists of 25% of the whole human body's oxygen. Studying capabilities have a very close relation with oxygen consumption according to many test reports
 
Just hang oxygen generator on the back of the seat

While driving alone in your car, you can inhale pure oxygen by wearing a headset or you can share oxygen with the vehicle's passengers through your car;s sun-visor

Connect headset to oxygen generator


Main Features

1. High-density of oxygen
1)Refresh in mind and body, and restore one's life rhythm by high-density of oxygen
2)The density of oxygen: 35%

2. Clean & Clear
1)It generates only the clean oxygen, and keeps air in the car clean and clear
2)Built in the antibiotic filter

3. Convenience
1)Convenience to operate
2)Convenience to rake on & off the neck-set
3)Convenience to carry by compact design and size
4)Convenience to breathe oxygen by 2m-length¡¯s headset

4. Safety
1)Dual safety device against the overheating

5. Design
1)Interior decoration which becomes anywhere
2)Slim and compact design, and convenience to carry
3)Color-selection to one's taste: Blue, Pink, etc

6. Economical efficiency

1)Low-electricity consumption by power-saving system

7. Anion generation
1)Sterilization and deodorization by anion-generation
 
Part Name

 
The procedure of oxygen-concentration

1. The air flows into by the air compressor
2. When the pressure is increased, the nitrogen is adsorbed to the adsorbent called of zeolite.
3. The oxygen is increased because the nitrogen is absorbed
4. The nitrogen is absorbed, but the oxygen remains
5. Open the right-side valve to get the oxygen
6. If you close the right-side valve and open the bottom valve, the nitrogen flow out
7. The nitrogen comes out, and the zeolite will be recreated
8. Return to the 1st step and go on the whole procedure of oxygen concentration

 
TEL: 82-1688-5648 FAX: 82-0504-134-7967 E-mai: chungpung-mugu@daum.net  All contents copyright(c) 2009 Chungpung Co. Ltd. All rights reserved